Carbon fiber packing with graphite

Carbon fiber packing with graphite is woven of strong carbonfiber after softening treatment and impregnation with a mixturelatex of fine graphite powder, PTFE dispersion and lubricant. It ischemical resistant, heat conductive and with high strength, so thisitem is widely used with revolving and reciprocating pumps in whichchemical corrosive media and particle grains exist. The successfultest result in application of high pressure ammonium and luiquidammonia pumps proved it’s the best sealing material for highpressure a, high temperature and corrosion.

Application conditions:

1) Max. working temperature:-200 ~ 650 oC(STEAM)

-200~ 565 oC(ATMOSPHERE)

2)Max. working pressure:5 Mpa(rotary pump)

Max. working pressure:15Mpa(reciprocating pump)

Max. working pressure:25Mpa(valve)

3)PH value: 0-14

4)Linear speed: 0-20M/S(rotary pump)

Linear speed: 0-2M/S(reciprocating pump)

Linear speed: 0-2M/S(valve)

5) Cross Section: ≥1/8” ~ ≤3”(3X3—75X75mm)

6) Density: 1.35 ~ 1.45g/cc

Regular package: 5 or 10kg/roll

Carbon fiber packing withgraphite